Case Studies and Stories
Optimizing Your Lubrication Program With Ultrasound
Why is Ultrasound so easy to use to assist with your lubrication program. We can use ultrasound to optimize your preventative schedule, but also to completely use ultrasound to determine when and how much you need to grease...
- Peter Boon
- UE Systems Inc.
A Hoist Application in the Mining Industry
A hoist or winder is a mission critical application found in underground mines. The hoist is used either to transport ore to the surface or personnel to or from the mine shaft. There are three types of hoists...
- Tim Sundstrom
- SPM Instrument
Boliden Garpenberg Mine
In January 2011, New Boliden decided on a major expansion of operations at the Garpenberg mine in central Sweden, aiming to successively increase production from 1.4 million to 2.5 million tons annually...
Electric Motor Fault
In this article we are going to take a look at a fault on an electric motor and then attempt to explain why the vibration changed in the way that it did...
- Jason Tranter
- Mobius Institute
SLAC National Accelerator Laboratory Implements IRISS Custom Solutions
Having a circuit breaker fail that powers very expensive and critical experiments at the laboratory can be potentially disastrous...
- Jason Brinker
- IRISS Inc.
Condition Monitoring of Ball Mill with HD Technologies
After long discussions, both plants decided to switch from the VCM system to the newer Intellinova system - and with fabulous results, which are highlighted in chapter...
- Robbert de Rouw
- SPM Instrument BV
Sub-Synchronous Vibration and Compressor Rotor Instability
In May 2015, a K-3603 HHP BOG compressor tripped on high-high radial vibration, exceeding trip setting 83 μm peak to peak as the compressor discharge pressure increased to 68 bars.
- Ahmad Fadzli
- MLNG Sdn. Bhd.
MCEmax Finds High Resistance Connection
Listen to Noah Bethel and Todd Gunderson as they explain how the MCEMax was used to identify a High Resistance Connection in one motor and an AirGap issue in another...
In-Rush/Start-Up Current Test Prevents Catastrophic Failure
The In-Rush/Start-up test was designed to look at the in-rush and decay of current during a direct start. In this case study, we evaluate the answer as it applies to a utility company...
- Noah Bethel
- PdMA Corporation
- 1
- …
- 5
- 6
- 7
- 8
- 9