Five Minute Facts
It Takes More Than Technical Proficiency to Produce Results
How many times have you called an equipment problem well ahead of time but the equipment still fails in service due to no maintenance follow-up?
- Dick Hancock
- 24/7
Gearbox Condition Monitoring – Understanding Dynamic Behavior vs Gear Surface Condition
We'll take a look at some helical cut gears and discuss the behavior of the gear in a variety of conditions...
- Ron Kittle
- SPM Instrument Inc
Imbalance, Misalignment, Looseness: Know the Difference
While wear is considered the main cause of failure in machinery, and preventing it should be a main focus for maintenance teams, there are a few other conditions that need to be closely monitored...
- Martin Armson
- Hansford Sensors
How the Cement Industry Can Catch Bearing Failure Early
Signal processing technique acceleration enveloping is widely used in the cement industry where bearings are vulnerable to premature failure due to aggressive working environments...
- Martin Armson
- Hansford Sensors
What Size Particles Do the Most Harm?
For many people, the key test to determine if there are damaging particles in the oil is to flied between their fingers or look at an oil sample. It is amazing how much you miss. This video will explain which particles do the most damage. Spoiler alert, they are very, very small...
- Jason Tranter
- Mobius Institute
Oil Analysis Trending vs. Alarm Limits
Many static alarm limits are based on statistical analysis of a common grouping of machines under similar operating conditions...
- Evan Zabawski
- TestOil
Introduction to IRISS Ultrasound EMSD’s
Learn how to use the Sonus XT with the IRISS VP12 US, VPDS and the S60 CAT Phone with the Sonus Vue APP...
- Drew Walts
- IRISS
Why Don’t My Oil Analysis Results Correlate?
A common issue related to report interpretation deals with a perceived necessity for the results from two or more different tests to indicate the same potential problem...
- Evan Zabawski
- TestOil
What Do You Consider to Be the Best Quantitative KPIs for a Successful Condition Monitoring Program?
Jason Tranter and Jeff Shiver (People and Processes) discuss what you need to measure how successful your condition monitoring program is...
- Jason Tranter
- Mobius Institute
- 1
- …
- 22
- 23
- 24
- 25
- 26
- 27