More than 300 million electric motors are used in infrastructure, large buildings, and industry globally. These motors account for about 2/3rds of the industrial power consumption. Electricity is required in almost all areas of the plant to provide the driving force that either operates the equipment that produces the products or provides the services that the plant’s equipment was built to perform..
- Mark Koch
- ALL-TEST Pro, LLC
Understand how MEMS-based accelerometers are helping meet the demands on vibration sensors into today’s Condition based Monitoring Applications. This 2 minute tip will highlight key features and benefits of MEMS-based accelerometers in comparison to piezosensors commonly used for CbM...
- Thomas Brand
- Analog Devices, Inc
Condition-based monitoring (CbM) is the Industry 4.0 equivalent of wearable fitness devices. With the explosion of connectivity comes the opportunity to observe the physical world like never before and to see physical processes in action, in real time, in fine detail. In industrial....
- Stuart Servis
- Analog Devices
We at IRISS cannot stress the importance of safety for electrical personnel enough and that why we created the IR Windows and Ultrasound Ports to help protect those doing electrical inspection by minimizing risk in this CBM data collection task.
- Drew Walts
Overhead cranes are often a single source cause of downtime in any manufacturing facility, especially when discussing those performing services in a steel mill’s melt shop. Often, these assets do not have redundancy that would allow for one to be taken....
- Stephen Bailey
- IVC Technologies
Failure mechanisms such as misalignment, balance, or lubrication issues can cause machinery failure. Many of these problems can be identified using standard non-destructive testing (NDT) methods including vibration analysis, infrared thermography, and tribology....
- Trent Martz
- IVC Technologies
A gear pump was used in a plastic extruder, where the gear’s head pumps the plastic mold from the barrel into the pelletizer. The extruder was already fitted with a condition monitoring system, but in early 2016 our customer decided...
- Rick Verbij
- SPM Netherlands