Gear Mesh Frequency

What’s New
Two Minute Tips
  • Vibration Analysis

Gear Mesh Frequency Monitoring

Gear mesh frequency analysis is a key tool for vibration monitoring programs focusing on gearboxes. There are a number of reasons a gearbox may fail including tooth wear, tooth load, gear eccentricity, broken or cracked teeth, gear misalignment and more.

10 Minute Talk
GMF Calculation
  • Vibration Analysis

GMF Calculation and Gearbox Problems Detection

Gearbox defects can be identified with a quite high accuracy using vibration analysis. This is because the fact the most common defect frequencies are the fundamental Gear Mesh Frequency (GMF) and its harmonics (such 2x GMF, 3x GMF) which can easily detected.

  • Pawel Lecinski
  • CMRP
White Papers
Technology Based Crane Monitoring
  • Condition Monitoring Management & AI

Technology Based Crane Monitoring and Diagnostics

Overhead cranes are often a single source cause of downtime in any manufacturing facility, especially when discussing those performing services in a steel mill’s melt shop. Often, these assets do not have redundancy that would allow for one to be taken....

Case Studies and Stories
A Hoist Application in the Mining Industry
  • Vibration Analysis

A Hoist Application in the Mining Industry

A hoist or winder is a mission critical application found in underground mines. The hoist is used either to transport ore to the surface or personnel to or from the mine shaft. There are three types of hoists...

What's Coming
Sponsored Content
Back to top