wind
Two Minute Tips
Wind Turbine DFIG Generator Slip Ring Defect
This case study shows how early detection of slip ring unit defect can result in a fast, inexpensive repair.
- Michael Hastings
- Brüel & Kjær Vibro (B&K Vibro)
Case Studies and Stories
Performing Electrical Signature Analysis on Wind Turbines
Howard Penrose gives an overview on the motors and gearboxes found in wind turbines and goes through case study examples involving electrical signature analysis…
- Howard Penrose
- MotorDoc LLC
Webinars
How to Detect and Diagnose Gearbox Bearing Looseness On a Wind Turbine
Case study on detecting and diagnosing gearbox bearing looseness on a wind turbine drive train.
- Jørgen Ellekjær
- Brüel & Kjær Vibro
Two Minute Tips
Demands on Vibration Sensors
Understand how MEMS-based accelerometers are helping meet the demands on vibration sensors into today’s Condition based Monitoring Applications. This 2 minute tip will highlight key features and benefits of MEMS-based accelerometers in comparison to piezosensors commonly used for CbM...
- Thomas Brand
- Analog Devices, Inc
White Papers
The Wearable for Machine Health: Condition-Based Monitoring
Condition-based monitoring (CbM) is the Industry 4.0 equivalent of wearable fitness devices. With the explosion of connectivity comes the opportunity to observe the physical world like never before and to see physical processes in action, in real time, in fine detail. In industrial....
- Stuart Servis
- Analog Devices
Two Minute Tips
Designing a Wind Turbine: Dealing with Resonance
Whenever the natural frequency of a turbine tower meets the rotor or blade frequency, it oscillates. It has a resonance. How do we avoid it…
- Partha Ravi
- OnyxInsight Australia
Five Minute Facts
Designing a Wind Turbine: The DNA Process
The DNA design of a wind turbine follows a certain process, whether it is a 1, 2, or 9 megawatt turbine. First, we estimate the tower top mass...
- Partha Ravi
- OnyxInsight Australia
Two Minute Tips
Maintenance Tips for Cooling Towers
View a few maintenance tips for protecting cooling towers and stopping any unplanned downtime with your equipment. Knowing the best detection technologies available today and how these can best be used, maintenance engineers can not only prevent failure but also significantly maximize machine uptime.
- Chris Hansford
- Hansford Sensors
Interviews
Spotlight on Motion Amplification
CBM CONFERENCE presenter Tony Barlow sits down with CBM CONNECT to reflect on his experience in the industry and how his partnership with RDI Technologies plays a vital role in Motion Amplification…
- Tony Barlow
- Chevron
This webinar distills the crucial lessons learned and insights gained into the top 10 considerations for successfully adopting and implementing remote, autonomous lubrication systems.
Wednesday, June 19, 2024 | 1:00PM – 2:00PM EDT
