Studies show that 50 to 70% of all equipment failures can be directly traced to a lubrication-related issue, most of which can be found with oil analysis.
A small number of semiconductor manufacturers have overcome the noise, bandwidth and g-Range shortcomings commonly associated with MEMS sensors used in Condition-based Monitoring (CbM) by producing several medium and high-performance MEMS vibration sensors with the latter being comparable to piezo accelerometers.
- Chris Murphy
- Analog Devices, Inc
New Single-Pair Ethernet: High-Quality Asset Health Insights and Power on Two Wires for Condition Monitoring Applications
Condition monitoring applications continue to grow in importance, as equipment manufacturers look to increase asset utilization with real-time monitoring of equipment, extend equipment lifespans, and increase throughput by utilizing predictive maintenance techniques to reduce maintenance costs and asset downtime..
- Maurice O'Brien
- Analog Devices, Inc
This webinar will provide an unconventional approach to quickly decipher all the information on a report in 2 minutes or less, using real examples, to encourage the reading of every report (not just those alarmed as critical).
Attendees will learn a new skill to save time reading reports, while bringing their oil analysis out of a reactive maintenance mode and back into a truly predictive maintenance mode...
- Evan Zabawski
There is a right way and a wrong way to write a condition monitoring report. Let’s go over some dos and don’ts…
- Salah Attia
- ALS Industrial
Using the same concept of a trifecta (three factors for success), this article provides companies with the winning strategies of motor maintenance, focusing on the three reliability tasks for electric motor testing and the order in which they should be applied.
- Noah Bethel
- PdMA Corporation
Organizations may be tempted to throw IIoT-enhanced devices and software at the wall to see what sticks. This may be an option, but it’s not conducive to a successful maintenance program rollout...
- Frederic Baudart
Efficient condition monitoring requires the use of technology and the right software. The right software will consolidate data for facility managers giving them the data needed to implement more efficient condition monitoring programs, it also allows......
- Warren Wu
Compressed air is used as a source of energy in a lot of sectors. This is due not least to the fact that compressed air is relatively easy to produce and transmit, but the provision of compressed air often involves considerable losses...
- Steffen Moeck