energized
Case Studies and Stories
Reducing Costs with ESA and MCA™ Technology
More than 300 million electric motors are used in infrastructure, large buildings, and industry globally. These motors account for about 2/3rds of the industrial power consumption. Electricity is required in almost all areas of the plant to provide the driving force that either operates the equipment that produces the products or provides the services that the plant’s equipment was built to perform..
- Mark Koch
- ALL-TEST Pro, LLC
Case Studies and Stories
Rotor Bar Fault Maintenance Issue: Vibration Sensor Alert
A 398 KW MV motor that runs a blower fan in a cement plant was showing strange behavior. The vibration equipment indicated vibration amplitudes that became chronic with the passage of time. The maintenance team, not knowing what the issue was, ran the motor until the bearings had to be replaced...
- Mark Koch
- ALL-TEST Pro, LLC
Two Minute Tips
Troubleshooting the Rotor and Air Gap on a De-energized Motor
Today we look at troubleshooting techniques and considerations on a de-energized motor for the rotor and air gap fault zones. One of the measurements taken during the five-minute MCE® standard test is inductance, and with the three phases of inductance, inductive imbalance is calculated.
- Noah Bethel
- PdMA Corporation
Two Minute Tips
Troubleshooting a De-energized Motor
In this tip we look at troubleshooting techniques and considerations when a motor is not running (de-energized), requiring controlled test signals to be sent into the motor..
- Noah Bethel
- PdMA Corporation
Five Minute Facts
“Just Because You Can, Doesn’t Mean You Should”
We at IRISS cannot stress the importance of safety for electrical personnel enough and that why we created the IR Windows and Ultrasound Ports to help protect those doing electrical inspection by minimizing risk in this CBM data collection task.
- Drew Walts
- IRISS
Webinars
Energized Electric Motor Test Capabilities
Gain a thorough understanding of the capabilities of energized electric motor testing. Learn expedient testing methods for identifying power quality problems, motor and motor circuit electrical issues, motor, drive train mechanical issues and most failure mechanisms that lead to motor insulation breakdown…
- Don Donofrio
- The Snell Group
White Papers
Bridging the Maintenance Gap to Condition-Based Maintenance Part II
EMSDs, along with data analysis and a new approach to maintenance called condition-based maintenance, can exploit the information age to not only bridge the knowledge gap, but to also improve the efficiency, safety, reliability and cost of electrical system maintenance…
- Martin Robinson
- IRISS Inc.
Five Minute Facts
Enclosed Cabinets with Ultrasound Inspection
What is one of the biggest problems around the world for electricians? Electrical workers come in contact with arc flashes and explosions from equipment. What regulations can you implement to stop these fatalities...
- Drew Walts
- IRISS
White Papers
Using Electrical Maintenance Safety Devices to Bridge the Skills Gap
With an impending skills gap among technical workers, proactive maintenance plans must also be safe, efficient and easier to implement …
- Martin Robinson
- IRISS Inc.
