Acoem USA
Two Minute Tips
Shaft Alignment 101: The Basics
In this video, you’ll learn the intricacies of precision alignment, exploring the measurement, calculation, and adjustment processes necessary to achieve optimal shaft alignment.
- ACOEM USA
- Acoem USA
Webinars
Selecting the Best Vibration Monitoring Method for Your Rotating Machinery
Join Mark Frogley explore how to maximize the potential of your machinery and your organization with the latest advancements in wireless, wired, and route-based vibration monitoring technologies..
- Mark Frogley
- Acoem USA
Five Minute Facts
Introduction To Wireless Sensors In Condition Monitoring
Condition monitoring is by no means a new concept in industry. In fact, it is so widely regarded as a best practice, that it becomes commonplace in more industries each year. With this increase in awareness, we have seen an influx of options over the years...
- John Waldron
- Acoem USA
Two Minute Tips
RCFA: Another Acronym but an Important One
There sure are a lot of acronyms around and it seems like new ones come out every day. Not sure about you, but I have a hard time keeping track of them. There are times when I attempt a conversation with someone, and they are spewing out so many acronyms it is hard to decipher just what they may be talking about...
- Stan Riddle
- Acoem USA
Five Minute Facts
Does Your Maintenance Program Need Maintenance?
A “good” maintenance program involves keeping equipment in peak condition and mitigating failure. Getting to this result takes the proper balance of strategies, people, and resources. Mark Frogley explains...
- Mark Frogley
- Acoem USA
10 Minute Talk
Pre-Alignment Steps
Acoem USA technical trainer James Otremba walks us through the pre-alignment steps. Performing these steps before any and every alignment (regardless of what tool you are using) will lay the groundwork for a successful precision shaft alignment. Before beginning this process, always remember to lockout the machine and take appropriate safety precautions.
- James Otremba
- Acoem USA
Five Minute Facts
The Fundamentals of Belts and Sheaves
In some industries, like oiling, drive belt replacement is considered a task for the new guys on the floor. It’s an easy job right? Absolutely. But there are many ways to do it incorrectly if not taught properly the first time.
- Stan Riddle
- Acoem USA
Two Minute Tips
Utilizing Phase to Confirm Machine Faults
It’s on all of the vibration fault charts, it’s taught in vibration classes, and it’s used for balancing – but how often is phase actually used by vibration analysts to confirm faults?
- James Otremba
- Acoem USA
Five Minute Facts
The Basics of Fans- Know Your Machines
Fans are a very common component in industry, they are used to move air from one place to another. Fans are used in dust collection, supplying air to boilers, providing ventilation to factories, are used in the manufacturing process and more.
- James Otremba
- Acoem USA
