Thermography
Ultrasound Assisted Lubrication: Three Ways to Improve Lubrication Practices
Take great care to avoid introducing contaminants into the lubrication. To monitor how much grease you are using, calibrate your grease gun: there is a device that attaches to your grease gun and gives you an LED reading of how much grease you’re using, mass-wise...
- Adrian Messer
- UE Systems
Infrared On Mechanical Assets To Improve Reliability
In this short video, we will discuss typical mechanical problems, mechanical infrared applications, and best practices for rotating components.
- Roy Huff
- The Snell Group
Major Middle East Utility Pilots use of IRISS Maintenance Inspection Systems
With more than four months per year where the maximum daily temperature exceeds 101°F (38°C), Dammam, Saudi Arabia is one of the hottest places on earth...
- Mohamed Ahmed
- IRISS Inc.
Middle East State Owned Utility Company, Fault Prevented
Following the detection of Partial Discharge activity, an offline investigation was conducted on the asset to locate the discharging component...
IRISS 3D Scanning Capabilities put to Work at Aerospace Manufacturer to Create Custom Solutions
The installation of Infrared Windows into electrical distribution equipment is an excellent way to kick-start a Condition Based Maintenance (CBM) Program...
- Mark Bowling
- IRISS Inc.
How Do You Decide How Often Measurements Should Be Taken?
Regardless of the condition monitoring technology, you must decide how often measurements...
- Jason Tranter
- Mobius Institute
Data Center Implements Infrared Inspection of Critical Switchgear
One of the most common metrics for measuring efficiency in facilities that host data centers for financial, insurance and telecommunications facilities is a power usage effectiveness (PUE)...
- Rudy Wodrich
- IRISS
Incorrect Temperature Measurements: The Importance of Transmissivity and Infrared Windows
Infrared (IR) windows save lives. Most Thermographers today are thankful to perform their scans without the danger and time of removing heavy panels. But just as the thermal imager is a tool - so is the IR Window. And as with any tool, it must be used correctly to get the desired results...
- Martin Robinson
- IRISS Inc.
Electrical Preventive Maintenance and Changes to NFPA 70E
Tim Rohrer, the founder, and CEO of Exiscan Infrared Windows has seen electrical safety standards change significantly over the years. These changes make your electrical preventive maintenance program or services group even more valuable to the organization...
- Tim Rohrer
- Exiscan
- 1
- …
- 6
- 7
- 8
- 9