Webinars
Model-Based Machine Health Algorithms
KCF Technologies is combining standardized machine health sensor installation with both AI-generated and human-validated cases of various machine faults to build asset-specific models for assets like pumps, fans, electric motors, gearboxes, etc. to automatically identify machine faults.
- Dave Kraige
- KCF Technologies, Inc.
Water Contamination in Lubricants
In this presentation, we will discuss types of water contamination, effects on the health of lubricants and machines, how we can control them and how we can measure these in a lab.
- Hina Sarfraz
- Lube Tribology Pvt Limited
Optimizing Pump Performance Leveraging Model-Based ESA Analysis for Effective Pump Curve Monitoring
In this webinar, we will explore the significance of pump performance monitoring and the implementations of model-based ESA analysis to enhance efficiency and reliability in various industrial applications.
- Tumay Karaver
- Artesis Technology Systems
Bearing Precision Lubrication and CBM using Vibration Monitoring and Ultrasound Detection
Under- and over-lubrication contributes to 40-70% of bearing failures. Precision lubrication can be achieved with ultrasound analysis and supported with vibration root cause analysis. Ultrasound monitoring can be used to hear and analyze the friction index of each bearing, indicate the precise amount of lubrication required, and extend the life of the bearing.
- Peter Eitnier
- Wilcoxon Sensing Technologies
Unlocking Opportunities: Harnessing Thermal Imaging for Enhanced Maintenance Solutions
This webinar will introduce attendees to the range of portable thermal imaging hardware and software solutions currently offered by FLIR, particularly in relation to their application in Condition Based Maintenance operations.
- Jason Cargill
- FLIR Systems Ltd
Top 10 Considerations for Implementing Remote, Autonomous Lubrication Systems
With the advent of the OnTrak Wired autonomous condition-based lubrication system in 2022 and its subsequent wireless evolution, the realm of industrial maintenance has been redefined. This webinar distills the crucial lessons learned and insights gained into the top 10 considerations for successfully adopting and implementing remote, autonomous lubrication systems.
- Blair Fraser
- UE Systems
Ultrasound Case Studies in Practice
In this webinar, we will go through a few recent case studies on the use of ultrasound technology such as the UltraView cameras or the Ultraprobes. This short webinar may save you thousands of euros tomorrow.
- Christopher Hallum
- UE Systems Europe B.V.
Accelerometer Mounting Techniques for Reliable Measurements
This webinar will advise vibration practitioners on determining the ideal location and mounting method of vibration sensors for a variety of machines and monitoring applications. Specific guidance is given for permanent accelerometer installations, route-based data collection, high-frequency vibrations, low-clearance locations, and electrical isolation
- Peter Eitnier
- Wilcoxon Sensing Technologies
The Good, Better, and Best Approach with Portable and Installed Motor Test Equipment
Unlimited human and equipment resources do not exist in industry. So how do plant and maintenance managers decide on the human and equipment resources? With today’s reliability technology offering advanced data analysis capability in both portable and permanently installed configurations what is a good balance between using portable and permanently installed equipment? This webinar will discuss considerations in making these decisions including resource availability, asset criticality, and where to get the best ROI from portable vs permanently installed technology.
- Noah Bethel
- PdMA Corporation