inspect
White Papers
Bridging the Maintenance Gap to Condition-Based Maintenance Part II
EMSDs, along with data analysis and a new approach to maintenance called condition-based maintenance, can exploit the information age to not only bridge the knowledge gap, but to also improve the efficiency, safety, reliability and cost of electrical system maintenance…
- Martin Robinson
- IRISS Inc.
Case Studies and Stories
Duke Energy Takes Advantage of IIoT for Predictive Maintenance Applications
This case study investigates Duke Energy’s quest to replace its monthly, manual data collection practices with daily, remote data collection and monitoring.
- Alex West
- IHS Markit
White Papers
Using Electrical Maintenance Safety Devices to Bridge the Skills Gap
With an impending skills gap among technical workers, proactive maintenance plans must also be safe, efficient and easier to implement …
- Martin Robinson
- IRISS Inc.
Articles
Ultrasound Provides Inspection Insight
On a recent plant visit, solutions provider Bob Dunn with I&E Central, Inc. used the SDT 270 ultrasound instrument and a contact sensor to inspect and capture waveforms on a series of valves on an automated manufacturing machine...
- Bob Dunn
- I&E Central, Inc.
White Papers
NFPA 70E 2018 Edition – Changes and Implications for Personnel Performing Condition Based Maintenance Tasks
The 2018 Edition of NFPA 70E Standard for Electrical Safety in the Workplace, was released in late 2017 with little fanfare. However, there are several significant changes in this edition that have potentially wide-ranging implications for maintenance personnel...
- Rudy Wodrich
- IRISS
Case Studies and Stories
Analytical Ferrography Forensics
A steel mill uses this pump to boost the water pressure it supplies to the hot mill for descaling. Thin scale forms rapidly on the hot slab and must be removed before entering the mill stands...
Case Studies and Stories
Analytical Ferrography Forensics II
A steel mill uses this motor to drive a double reduction gearbox on a roughing mill at an input speed of 450 rpm. The motor has babbitt sleeve bearings...
This webinar distills the crucial lessons learned and insights gained into the top 10 considerations for successfully adopting and implementing remote, autonomous lubrication systems.
Wednesday, June 19, 2024 | 1:00PM – 2:00PM EDT
