Extruder Gear Pump

What’s New

10 Minute Talk

Vibration Analysis

HD Technology Saves an Extruder Gear Pump

A gear pump was used in a plastic extruder, where the gear’s head pumps the plastic mold from the barrel into the pelletizer. The extruder was already fitted with a condition monitoring system, but in early 2016 our customer decided...

Rick Verbij
SPM Netherlands

What's Coming

This webinar will advise vibration practitioners on determining the ideal location and mounting method of vibration sensors for a variety of machines and monitoring applications. Specific guidance is given for permanent accelerometer installations, route-based data collection, high-frequency vibrations, low-clearance locations, and electrical isolation.

WEDNESDAY, APRIL 24, 2024 | 2:00PM-3:00PM EDT

This webinar will introduce attendees to the range of portable thermal imaging hardware and software solutions currently offered by FLIR, particularly in relation to their application in Condition Based Maintenance operations.

THURSDAY, APRIL 25, 2024 | 9:00AM – 10:00AM EDT

This webinar distills the crucial lessons learned and insights gained into the top 10 considerations for successfully adopting and implementing remote, autonomous lubrication systems.

Wednesday, June 19, 2024 | 1:00PM – 2:00PM EDT

Are you ready to take your reciprocating compressor monitoring strategy to a whole new level? Don’t waste any more time. Learn more today!

Reliability solutions | Increase uptime and protect equipment with lubrication reliability best practices. Let LE help you keep your lubricants clean and dry.

Streamline Analysis with Supervised Machine Learning from ERBESSD INSTRUMENTS – Create & Customize Learning Models based on individual assets and asset types, share models, and maximize uptime.

Discover the new Acoem AT-400, featuring dual-axis sensors for versatile performance, seven methods for measuring misalignment, and geometric measurement capabilities.

Integral cable, side exit accelerometers with a pivoting mounting base - 360⁰ orientation, easy installation in low profile applications. Watch the video!

Extruder Gear Pump

WEDNESDAY, APRIL 24, 2024 | 2:00PM-3:00PM EDT

THURSDAY, APRIL 25, 2024 | 9:00AM – 10:00AM EDT

Wednesday, June 19, 2024 | 1:00PM – 2:00PM EDT

We Use Cookies to Enhance Your Experience.