Why MEMS Accelerometers Are Becoming the Designer’s Best Choice for CbM Applications
A small number of semiconductor manufacturers have overcome the noise, bandwidth and g-Range shortcomings commonly associated with MEMS sensors used in Condition-based Monitoring (CbM) by producing several medium and high-performance MEMS vibration sensors with the latter being comparable to piezo accelerometers.
- Chris Murphy
- Analog Devices, Inc
SONAPHONE DataSuite Software: Management of Ultrasonic Data in a Power Station
This white paper will present and shed more light on how ultrasonic technology is used and the benefits offered by DataSuite in the context of a power station...
- Steffen Moeck
Ultrasound: Is the Sound Good or Bad?
How many of you have walked through your plants and heard a strange noise coming from somewhere? You may have noted that it didn’t sound good. When you hear those noises…
- Christopher Hallum
- UE Systems Europe B.V.
Leak Management of Compressed Air Systems Using Ultrasound
Compressed air is used as a source of energy in a lot of sectors. This is due not least to the fact that compressed air is relatively easy to produce and transmit, but the provision of compressed air often involves considerable losses...
- Steffen Moeck
NFPA 70E 2018 Edition – Changes and Implications for Personnel Performing Condition Based Maintenance Tasks
The 2018 Edition of NFPA 70E Standard for Electrical Safety in the Workplace, was released in late 2017 with little fanfare. However, there are several significant changes in this edition that have potentially wide-ranging implications for maintenance personnel...
- Rudy Wodrich
Ultrasound Assisted Lubrication: Three Ways to Improve Lubrication Practices
Take great care to avoid introducing contaminants into the lubrication. To monitor how much grease you are using, calibrate your grease gun: there is a device that attaches to your grease gun and gives you an LED reading of how much grease you’re using, mass-wise...
- Adrian Messer
- UE Systems