10 Minute Talk
Tribology is the science that studies the relationship between lubrication, friction, and wear. It is all about the lubricant film inside the bearing. The film that happens inside a roller element bearing, whatever the shape of the roller is, is referred to as Elastohydrodynamic Lubrication. Mina Soliman explains these terms more in depth.
- Mina Soliman
- Noria Corporation
The Low Rate/ High Rate Technique is a measuring method that was developed to follow up not only the bearing damage condition, but also the lubrication condition of rolling element bearings.
- Håkan Hedlund
- SPM Instrument AB
Have you ever wondered exactly how machine learning works? Where does the system get the data for equipment that is not allowed to fail often? Jason Tranter goes into a method an AI system might use to tell us whether a bearing is about to fail…
- Jason Tranter
- Mobius Institute
In this Nine Minutes of Knowledge, Datong shares a Paper machine case study and explains how to detect bearing defaults and what applications were used to fix the issue..
- Ivan Salim
- SPM Instrument Indonesia
David Howard addresses some of the most common questions people have about wireless sensors, including topics such as WIFI and range, product life cycle, software and gateway, the maximum temperature a sensor can withstand, battery life, and what happens if a device loses connection…
- Dr. M. David Howard
- Erbessd Instruments
The early detection and fault analysis of bearing problems is crucial. When a rolling-element bearing develops flaws on the races and/or rolling elements, there are four vibration frequencies that can result...
- Pawel Lecinski
Ron Newman leads us into the plant, giving us the practical information we need to choose an instrument and measure a machine, starting with safety requirements…
- Ron Newman