thermalcamera

What’s New
Five Minute Facts
Infrared Program Procedure
  • Thermography

Procedures

The development of inspection guidelines or procedures are crucial to the success and sustainability of infrared programs. They can improve safety, consistency and support the continuity of your program. This brief tip will introduce the benefits of creating and utilizing infrared procedures. Also examples of the concept of generic and specific guidelines that can be used on different equipment categories will be shown.

10 Minute Talk
  • Thermography

Tank Levels

The reliability of tank level indicators has improved significantly over the past few decades. This tip will discuss how taking advantage of differences in thermal capacitance of tank contents allows for fast and effect tank level inspections.

Five Minute Facts
  • Motor Testing

Isolating Motor Faults Using Resistance and Inductance

Resistance and inductance are crucial measurements for assessing electric motor condition. This instructional presentation covers how to determine rotor or stator faults using just these two parameters....

10 Minute Talk
  • Thermography

Four Electrical Failure Modes

Electrical failure modes can be divided into four main categories. This tip will briefly discuss these categories and their associated thermal patterns to help the field thermographer better understand and identify thermal anomalies found in the field...

Five Minute Facts
Color Palette for Infrared Camera and Program - Thermography - CBM CONNECT
  • Thermography

What’s the Best Color Palette?

What is the best color palette to use for your infrared camera and program? There are several factors to contemplate when selecting a palette for use in the field and additional considerations when selecting a palette for analysis and reporting. This tip will briefly describe some options to scrutinize when deciding what the best palette is for you.

Five Minute Facts
Can you measure an anomaly
  • Thermography

You Can See It, but Can You Measure It?

Just because you can see an anomaly does not mean you can radio-metrically measure it using an infrared camera. The concept of spatial and measurement resolution is one of several reasons and will be briefly described in this 5-minute fact...

10 Minute Talk
  • Thermography

Establishing Infrared Inspection Frequencies

You have an infrared camera. You’re ready to implement an infrared program. You know what assets you want to inspect. How do you establish an effective inspection frequency for your program? This short presentation will take you through the many, many aspects that must be considered when establishing inspection frequencies. Annual inspections do not support reliability. One set frequency for all assets is not the answer either. Take a few minutes to see what industry best practices suggest…

What's Coming
Sponsored Content
Back to top